According to the different applications of fluorine release membranes, the products are divided into 3 categories-technical knowledge
According to the different applications of the fluorine release film, the products are divided into 3 categories. Source: protective film factory direct sales Release time: 2019-12-04 Click: 1576 1. Wet coating: the release surface of the fluorine release film is uniformly coated on the substrate The silica gel is clothed and combined with the silica gel into the oven to be cured at high temperature, which is called wet coating. 2. Hot sticking: the fluorine release film is placed at the place where it is attached. After the PET or PI is coated with silica gel, it will be bonded with the fluorine release film when it is still warm. The fluorine release film does not need to enter the oven to undergo high temperature, but the silica gel When the tape has residual temperature, it is closely adhered to the fluorine release film, which is called hot post. 3. Cold paste: Fluorine release film is laminated with silicone products, such as 3M silicone double-sided tape 9731, 3M9119, 3M4377, etc., which are processed by punching, or made into finished products required by customers, all at room temperature during the manufacturing process It does not involve temperature and is called cold paste. Foshan Bowei Environmental Protection Material Co., Ltd. is an electronic material supplier with 20 years of experience. It can produce PET film with various functions, such as: sub-(matte) PET film, flame-retardant (fire-resistant) PET film, inkjet printing Film, anti-static PET film, anti-fog PET film, anti-UV PET film, non-shrinking PET film, PET release film, optical PET film, etc. Interested parties welcome to inquire!