What is the difference between fluorine release film and silicone oil film? -technical knowledge
What is the difference between fluorine release film and silicone oil film? Source: Protective film factory direct sales Release time: 2019-08-13 Hits: 1059 As far as fluorine film and silicone oil film are concerned, the appearance of the two release films is not much different, but what are the specific differences and classifications? According to the different applications of fluorine release film, the products can be divided into the following three categories: 1. Wet coating: refers to the release surface of the fluorine release film is uniformly coated with silica gel on the substrate, and the silica gel enters the oven for high temperature curing. , Called wet coating; 2. Hot sticking: Place the fluorine release film at the bonding place. After the PET or PI is coated with silica gel, when there is still residual temperature, it will be bonded with the fluorine release film. The fluorine release film is not required. Enter the high temperature of the oven and call it hot post; 3. Cold post: Fluorine release film is laminated with silica gel products, such as 3M silica gel, double-sided tape 9731, 3M9119, 3M4377, etc., to be processed or made into customer’s The required finished products are all carried out at room temperature during the manufacturing process, and temperature is not involved, and is called cold paste. Foshan Bowei Environmental Protection Material Co., Ltd. is an electronic material supplier with 20 years of experience. It can produce PET film with various functions, such as: sub-(matte) PET film, flame-retardant (fire-resistant) PET film, inkjet printing Film, anti-static PET film, anti-fog PET film, anti-UV PET film, non-shrinking PET film, PET release film, optical PET film, etc. Interested parties welcome to inquire!