Classification, characteristics and uses of polyester film [PET]-PET film-film supplier

[Stamping protective film] Use a substance containing methyl salicylate, such as wind oil, cooling oil, alcohol, gasoline, etc., to wipe the adhesive area and heat it with a hair dryer to soften the 3M tape, which is easier to tear. There is also a harder paper cutter (utility knife) and lightly scrape it. There are always some labels on the stainless steel basins or glassware newly bought at home. After the labels are removed, the marks left by the 3M tape on them are difficult to remove. Wiping with a damp cloth or scraping with a knife often leaves marks. After many practices, I have summarized some tips to share with you. For the adhesive traces on the surface of hard objects, we can apply non-greasy nail polish remover to the surface of the object, and then gently wipe it with a soft cloth; these traces can also be removed with industrial alcohol or gasoline. If these stickers get on the skin, you can also use lemon juice to remove them. In addition, hand cream can also achieve the effect of removing 3M tape. Hand cream contains a lot of water (generally more than 70%), and the water contains a certain amount of surfactant. Surfactants have good wetting, penetrating, and dissolving abilities, and can quickly penetrate between the adhesive and the surface of the object to achieve the purpose of removal. You can also find that some similar products, such as creams, facial cleansers, and detergents have the same effect. For the more stubborn double-sided tape on the carpet, the best way is to carefully trim off the adhesive marks on the top of the carpet fluff.