Hot Selling Semi-automatic PVA Film Packaging Machine

Cold water soluble embroidered film is used as a temporary carrier in embroidery, because used as advances material with water-soluble, as long as more than ten seconds on the low temperature water bubble, advances, it dissolves, embroidery patterns can be present.

Its characteristic is shown as the following: taken the unique surface design and brittle Zhang Liqiang, do not make the embroidery needle, and needle, don't walk, not offset;

Painted green no side effects, non-toxic, no pollution, do not contain formaldehyde, eventually degrade to CO2 and H2O;

U cold water soluble film can completely meet the requirements of all kinds of embroidery technology advances, on the strength of the bottom;

Taken the cold water soluble film can be applied to all kinds of high-grade underwear, fashion and special cloth.

there are two kinds of practice is water soluble film, called a lace, called a vacuum to embroider.

Water soluble film is divided into two kinds, one kind is cold water soluble, soak in cold water for 24 hours or so will be dissolved in water;

The other one is hot water soluble, need to use above 80 degrees hot water to boil.

Lace is not cloth, embroidery on the water soluble film directly, and then do the post-processing, remove water soluble film, leaving only embroidery thread.
Girls often can use lace underwear.
Is sometimes used in the adornment before the bosom of flowers.

Vacuum is a bottom cloth embroidery, pad on the fabrics need several layers of water soluble film, depending on the actual needs.
Usually around three layers.

Then the embroidery, nothing to do after finishing, remove the water soluble film.
Embroidery thread will be raised, and the middle is empty!

Embroidery is used as a temporary carrier, can be applied to all kinds of high-grade underwear, fashion and special cloth

Packaging is an essential component of the food and medical industries, as it ensures the safety, quality, and integrity of products during storage and transportation. Water-soluble film packaging has become increasingly popular in these sectors due to its convenience, sustainability, and efficiency. However, to ensure compliance with regulations and standards, it is crucial for companies to follow specific guidelines when using water-soluble film packaging. This compliance guide will outline the key factors to consider when using water-soluble film packaging in the food and medical industries.

Regulatory Requirements

Water-soluble film packaging used in the food and medical industries must meet strict regulatory requirements to ensure the safety and quality of products. In the food industry, packaging materials must comply with food contact regulations set by regulatory bodies such as the Food and Drug Administration (FDA) and the European Food Safety Authority (EFSA). These regulations ensure that packaging materials do not transfer harmful substances to food products and do not affect the taste or odor of the food. In the medical industry, packaging materials must meet the requirements of regulatory bodies such as the United States Pharmacopeia (USP) and the European Pharmacopoeia (Ph. Eur) to ensure the safety and efficacy of medical products. Companies must carefully review and follow these regulations when using water-soluble film packaging to avoid non-compliance and potential legal issues.

Material Selection

Choosing the right water-soluble film material is crucial for ensuring the effectiveness and safety of packaging in the food and medical industries. Water-soluble films are typically made from materials such as polyvinyl alcohol (PVA) or polyvinylpyrrolidone (PVP), which dissolve in water and leave no residue. When selecting a water-soluble film material, companies must consider factors such as the type of product being packaged, the desired dissolution rate, and the environmental impact of the material. Companies should also ensure that the selected material complies with relevant regulations and standards for food and medical packaging to avoid any compliance issues.

Compatibility with Products

Water-soluble film packaging must be compatible with the products it is packaging to ensure the integrity and quality of the products. In the food industry, water-soluble film packaging must be able to protect food products from external contaminants, moisture, and oxygen to maintain freshness and prevent spoilage. In the medical industry, water-soluble film packaging must be able to protect medical products from exposure to light, air, and moisture to maintain their efficacy and shelf life. Companies must conduct compatibility testing to ensure that the water-soluble film packaging does not interact with or degrade the products it is packaging. Failure to do so may result in product contamination or degradation, leading to potential safety issues and compliance violations.

Storage and Handling

Proper storage and handling of water-soluble film packaging are essential to maintain the quality and effectiveness of the packaging. Water-soluble films are sensitive to humidity, temperature, and light, which can affect their dissolution rate and physical properties. Companies should store water-soluble film packaging in a cool, dry, and dark environment to prevent degradation and ensure its effectiveness. When handling water-soluble film packaging, employees should follow proper protocols to avoid damaging the packaging and compromising its integrity. Companies should also establish clear guidelines for the storage and handling of water-soluble film packaging to ensure compliance with regulations and standards.

Disposal and Environmental Impact

Water-soluble film packaging offers environmental benefits compared to traditional packaging materials, as it is biodegradable, compostable, and water-soluble. However, companies must still consider the disposal and environmental impact of water-soluble film packaging to minimize their carbon footprint and promote sustainability. Water-soluble film packaging should be disposed of properly through composting or recycling programs to reduce waste and prevent pollution. Companies should also consider the life cycle of water-soluble film packaging, from production to disposal, to assess its overall environmental impact and identify areas for improvement. By prioritizing sustainability and environmental responsibility, companies can use water-soluble film packaging in a way that minimizes their impact on the environment and meets compliance requirements.

In conclusion, water-soluble film packaging offers numerous benefits for the food and medical industries, including convenience, sustainability, and efficiency. However, to ensure compliance with regulations and standards, companies must carefully consider regulatory requirements, material selection, compatibility with products, storage and handling, and disposal and environmental impact when using water-soluble film packaging. By following the guidelines outlined in this compliance guide, companies can effectively utilize water-soluble film packaging while maintaining the safety, quality, and integrity of their products. Remember to prioritize compliance and sustainability when using water-soluble film packaging in the food and medical industries.