Technical characteristics of PET three-layer scratch-resistant protective film-film supplier

1. The glue layer is a silicone glue layer. 2. The adhesive layer of the PET protective film is an acrylic adhesive layer. 3. The thickness of the PET three-layer scratch-resistant protective film is 0.08-0.15mm. 4. PET release film, PET base material and PET protective film base material are all polyester films with a transmittance above 95%. 5. The surface strength of the cured surface of the PET substrate is 4H. PET three-layer anti-scratch protective film has the following practical effects: the PET protective film with anti-scratch coating is attached to the cured surface of the PET substrate, and the PET release film is attached to the non-cured surface, and the PET release film , The transmittance of the PET substrate and the PET protective film substrate is above 95%, which can make the product have the functions of automatic suction and automatic exhaust pipe, which can remove air bubbles, and has low viscosity and is easy to detach. It can be pasted repeatedly without affecting the actual effect of the application. It has long-lasting and stable characteristics. It has extremely high light transmittance and surface strength. The touch effect is very good. The display can be maintained reasonably, and it is not easy to be scratched or scratched. Environmental pollution. It is a company specializing in the production of PET film with multiple functions, such as: transparent PET film, milky white PET film, release PET film, supply of PET motor film, etc. With a wide variety of products, affordable prices, and environmental protection, we provide customers with excellent quality and service based on the service tenet of excellence in production, honesty and trustworthiness in distribution, and warm and thoughtful service, and the spirit of assisting partners to achieve their own careers. Interested parties welcome to inquire!