The main reason for 'silicon drop or F' in silicone release film-technical knowledge

The main reason for the 'silicon drop or F' in the silicone release film: direct sales by the protective film manufacturer. Release time: 2019-07-23 Click: 1638 1. The polarity of the interface between the coating material body and the support material is seriously mismatched, that is, the interface Problems; 2. The existence and migration of residual monomers (including UV photoinitiators), oligomers, and polymer fragments lead to many subsequent problems (residual adhesion is an apparent phenomenon, and the appearance is a static problem, but in fact it is a dynamic problem ); 3. The performance requirements of non-silicon release agents (not including F-containing materials) are too demanding, resulting in a slow process of research and development (for example, the peeling force is required to be ≤10g/25mm); 4. The solvent used in the coating is applied to the coating The layer/supporting film interface has a certain influence. Foshan Bowei Environmental Protection Material Co., Ltd. is an electronic material supplier with 20 years of experience. It can produce PET film with various functions, such as: sub-(matte) PET film, flame-retardant (fire-resistant) PET film, inkjet printing Film, anti-static PET film, anti-fog PET film, anti-UV PET film, non-shrinking PET film, PET release film, optical PET film, etc. Interested parties welcome to inquire!