How to solve the problem of interface bonding between PET substrate film and coating-technical knowledge
How to solve the problem of interface adhesion between PET substrate film and coating Source: Protective film factory direct sales Release time: 2019-11-04 Click: 1453 Generally require that the optical film substrate should be apparently flat and free of defects, gloss and light transmittance High, low haze, good coating performance, etc. However, if the surface of the substrate is flat and defect-free, there are fewer active points in contact between the coating and the surface of the film substrate, which makes it difficult for the coating liquid to penetrate and form adsorption with it; if the substrate gloss and light transmittance are high , The surface roughness of the substrate is low, resulting in fewer bonding points between the coating liquid and the surface of the film substrate. At the same time, the PET polyester film has its own characteristics, such as the highly oriented crystals on the surface of the PET film, which makes it difficult for the coating molecules to penetrate into the PET film, and it is also difficult to form a good interface adhesion with the coating. Therefore, when preparing PET optical films, solving the problem of interface adhesion between the substrate film and the coating has become another important direction of optical film research. Foshan Bowei Environmental Protection Material Co., Ltd. is an electronic material supplier with 20 years of experience. It can produce PET film with various functions, such as: sub-(matte) PET film, flame-retardant (fire-resistant) PET film, inkjet printing Film, anti-static PET film, anti-fog PET film, anti-UV PET film, non-shrinking PET film, PET release film, optical PET film, etc. Interested parties welcome to inquire!